Pneumatic tapping machine

MRCM share / 2022-01-25 / Hits(314)

Pneumatic tapping machine

The pneumatic tapping machine
The pneumatic tapping machine uses high-pressure air as power. When the high-pressure air is connected to the tapping motor through the air pressure regulator, the trigger is pressed, and the high-pressure air enters the motor through the intake valve and the reversing button assembly, and drives the rotor blades of the motor to generate the shaft. After the rotor moves, it can output more convenient and efficient tapping products through the speed change of each gear pair.

principle
Its structure is roughly composed of a mounting seat, a rack, a moving rod group, a movement, a tapping chuck, and a new type of equipment.
Its various parts and application functions
1. Mounting seat, because the whole machine is light and mobile, it can be installed on the machine table, iron workpiece, permanent magnet seat, or mobile car.
2. Rack: similar to a radial drill, can be rotated or lifted
3. Moving rod group: can go up and down and at the same time elastic cast reset, or rotate reset
4. Movement: It can be rotated to achieve universal tapping, gear shifting, and instant speed regulation
5. Tapping chuck: protect the chuck when the torque is overloaded, slip, and keep the tap
Features
Features: The industrial market mainly uses pneumatic tapping machines and pneumatic tapping machines. Pneumatic is different from electric, and works through the power source provided by the air compressor. The pneumatic tapping machine is composed of a pneumatic spindle, an air pipe, an air filter oiler, a swivel arm, an extension arm, a fixed seat, and a tapping chuck. Pneumatic tapping machine is mainly light, because it has a rotating arm, an extension arm and a fixed seat, so with the fixed seat as the origin and the rotating arm and the extension arm as the working radius, any point within the working radius can be lightly tapped .
The air filter oiler is mainly used to filter the air source again to ensure that the compressed gas does not have too much water. After the gas is filtered, it passes through the oiler, and the oil is atomized and then goes through the air pipe with the air source to the motor port.
The spindle has a positive and negative switch, 1. Press the positive handle switch, the spindle rotates forward; 2. When pressing the positive handle switch, press the reverse button at the same time, the spindle reverses; 3. There is a connecting thread at the lower end of the spindle The quick-change interface of the chuck; 4. The spindle can change speed when it stops, for different tapping sizes.
The tap chuck is used to hold the tap and then clamp it to the quick-change interface of the spindle. Tap chucks are divided into safety torque tap chucks and non-torque tap chucks.
By connecting the above components and installing them on the workbench, we can tap the products that need to be processed.
Application field
Application field Suitable for car or motorcycle body, frame, chassis, connecting rod, engine, cylinder and various mechanical parts, machine tools, hardware products, metal pipes, gears, pump bodies, valves, fasteners, etc. parts processing.
The tapping machine is a kind of machine that processes internal threads, screws or snaps on the inner side of the holes of various parts with through holes or blind holes of different specifications, such as machine shells, equipment end faces, nuts, flanges, etc. Mechanical processing equipment. Tapping machine is also called tapping machine, thread tapping machine, thread tapping machine, automatic tapping machine, etc. According to the different types of driving power, tapping machines can be divided into manual tapping machines, pneumatic tapping machines, electric tapping machines and hydraulic tapping machines, etc.; according to the number of spindles of tapping machines, they can be divided into single-axis tapping machines , Two-axis tapping machine, four-axis tapping machine, six-axis tapping machine, multi-axis tapping machine, etc.; Nut tapping machine, flange nut tapping machine, round nut tapping machine, hexagonal nut tapping machine, blind hole nut tapping machine, anti-theft nut tapping machine and other models; according to the automation of the tapping machine processing process Different degrees, tapping machines can be divided into automatic tapping machines, semi-automatic tapping machines and manual tapping machines; Hole tapping machine, etc. The automatic tapping machine has the highest degree of automation. When working, as long as the parts are put into the hopper, they can be automatically fed, automatically positioned, automatically clamped, automatically tapped, and automatically unloaded. One worker can operate multiple devices at the same time. High production efficiency, which can significantly save labor costs! High-quality tapping machine has the characteristics of novel design, reasonable structure, easy to use, high degree of automation, easy to use, high efficiency, maintenance-free, and high cost performance. High-quality nut tapping machine processing The thread finish of all kinds of nuts produced is high, and the qualified rate of finished products is high.
The pneumatic wire machine is light, flexible, efficient and has the advantages that other similar equipment cannot replace. The repeated positioning is fast and fast, the working range is large, and the operation is safe. The ordinary air pump is only 5-8 kg. The new pneumatic tapping machine avoids the limitations of lathes, drilling machines or manual tapping, saving time and effort, not easy to rotten teeth, and the tap is not easy to break Wait. The chuck of the tapping machine has high torque protection, and the pneumatic tapping machine is suitable for all machinery manufacturing industries, machine tools, mold (factory) machinery, plastic machinery, printing machinery, packaging machinery manufacturers, engineering machinery, automobile and motorcycle parts, aviation Engines, rolling stock, tobacco machinery and general machinery industries.
         Zhejiang Meiri Intelligent Equipment Co., Ltd. is a service provider specializing in the development and production of small special tool grinders and precision machines. The company's main products: CNC tool grinder, drill grinder, milling cutter grinder, thread tapping grinder, turning tool grinder, saw blade grinder, universal knife grinder, universal tool grinder, chamfering machine, pneumatic tapping machine , Electric tapping machine, zero point positioning system, precision vise, rotary table, EDM machine and other precision machinery series. The products have applied for 70 patents and 3 invention patents, with an annual output of more than 20,000 grinding machines, accounting for more than 60% of the domestic market and about 50% of the global market, and 80% of the export products are sold to developed industries such as Japan and Germany.


 

“MRCM do NOT have any MOQ requirement. We can send a sample model to you for quality check and test within 72hours. It's ALL FREE ! ”