MRCM share / 2022-02-15 / Hits(1471)
Detailed operation of automatic circular saw blade grinding machine
The operation method of automatic circular saw blade grinding machine
1. Loosen the surrounding pallet, adjust the angle of the grinding disc and lock it
2. Adjustment of the central axis:
①To grind the small saw blade, turn the central axis to the side close to the grinding blade, and vice versa.
②Push the center shaft to the right end.
③ Install the saw blade, rotate the hand wheel, and preliminarily determine the position of the sawtooth grinding surface.
④Rotate the turntable to determine the angle of the sawtooth grinding surface.
⑤Rotate the table to determine the feed angle of the grinding blade. Generally, the angle between the grinding surface and the working surface of the grinding wheel is about 1°.
3. Adjustment of positioning combination:
Adjust the saw blade to the best sharpening state, rotate the positioning bracket and the positioning plate support, slightly adjust the positioning to a more suitable sawtooth heel and leave a grinding gap (self-determined), and tighten the fixing screw.
4. Adjust the center axis to the right to the above-mentioned grinding gap.
5. After checking that all parts are fixed, the saw blade should be smoothly fed and ground by hand.
Equipment performance of automatic circular saw blade grinding machine:
This machine is specially designed for the sharpening of carbide saw blades. It is suitable for grinding various super carbide saw blades. It is equipped with an adjustable surrounding support plate, which can support the teeth of the saw blade or other abrasives to the maximum extent. , Equipped with positioning pins, which can be adjusted to the best position according to the diameter of the saw blade and the size of the teeth. The slide plate can be rotated horizontally, which can ensure the original magic blade angle of the saw blade or change it. There is a rotary table on the saw pallet, which is convenient to adjust the feed angle of the sharpening edge. The rotary table is equipped with sliders, mandrels, limit screws and convenient operation, and also ensures the radius of the grinding edge to the center. The grinding head is equipped with a +-20° rotating mechanism, which can meet the grinding of beveled saw teeth.
Product use of automatic circular saw blade grinding machine:
One: This machine is specially designed for the sharpening of alloy saw blades, suitable for grinding alloy saw blades of various angles.
Two: It is equipped with an adjustable wrap-around support plate, which can support the saw tooth and other abrasive parts to the greatest extent, prevent jumping, and improve the quality of the sharpening edge.
Three: Equipped with positioning pins, which can be adjusted to the best position according to the diameter of the saw blade and the size of the teeth to ensure the consistency of the sharpening.
Four: The skateboard can be rotated horizontally, and can be accurately adjusted to the original angle of the saw tooth, and can also be ground according to the new angle.
Five: The saw pallet is equipped with a rotary table, which is convenient to adjust the feed angle of the sharpening blade. The rotary table is equipped with a slider, a mandrel, and a limit screw, which is convenient to operate.
Six: Suitable for grinding saw blades with a diameter of 80mm~700mm, equipped with 4 shaft cores (20mm, 22mm, 25.4, 30mm), suitable for most of the saw blade apertures
“MRCM do NOT have any MOQ requirement. We can send a sample model to you for quality check and test within 72hours. It's ALL FREE ! ”